Black Powder Accessories

Barnes .50 cal Bullet Aligner

Bullet alignment is one of the most important steps to obtaining great accuracy in muzzleloading. Barnes MZ Aligner enhances the accuracy of these high performance muzzleloading bullets. Barnes' bullet aligner will align your bullet to the centerline of...

Barnes Spitfire Bullet Aligner Tool

The Barnes Bullet Aligner is an indispensable tool specially designed to properly align Barnes muzzleloader bullets. Attach it to the ramrod for easy access, and to insure proper seating and maximum accuracy. Aligner tool is designed to fit each nose...

CVA Blackhorn 209 Breech Plug

Enable your CVA to shoot Blackhorn 209 Powder with increased results!

CVA Patch Puller

Screws onto the end of the ramrod to pull patches through while cleaning.

CVA Universal Fiberglass Ramrod

Universal 36" Fiberglass Rod that can be cut down to specific CVA models.

Powerbelt Speed Clip Loader

Designed for super fast access when reloading in the field. Holds 3 loaders, each with a Powerbelt bullet and magnum pellet charge and four 209 primers. Easily attaches to our gun sling, your belt or a lanyard for easy accessCVA's powerbelt speedclip...

T/C Speed Shots 45/50 Cal 2pk

The Speed Shot™ holds a magnum muzzleloader charge for quick follow-up shots. The tubes can be cut to fit your specific loads. Over-sized gripper allows for fast reloading. Speed Shots™ can be used alone or in conjunction with our sling, belt...

Thompson Center 1 Piece Power Rod

Universal ramrod with cut-to-length design for use with muzzleloader barrels up to 28" 5.5" telescoping section allows the ramrod to function as a cleaning rod on removable breech plug rifle designs Removable, universal brass bullet seater doubles as a...

Thompson Center 209 Flex Capper

Capacity- Holds 8-  209 Caps

Thompson Center 4-N-1 Quickshot

(2 per pack).• Carries your powder• Carries your projectile• Carries your cap• Serves as your bullet starter• Also holds a 209 Primer in recess on the top.s.

Thompson Center Adjustable Black Powder Measure

Measures 50-120 grains 10 grain incriments.

Thompson Center Ball and Wad Puller

TC Black Powder 45 and .50 Caliber Ball Bullet and Wad Puller 10-32 Threads

Thompson Center Breech Plug Wrench

Breech Plug Wrench (Speed Breech® XT) for Triumph®, Pro Hunter™ TM XT or Endeavor®.

Thompson Center Flex Priming Palm Saver

Hold 4, 209 Primers Handle is made of Bioflex

Thompson Center In Line Nipple Pick

Fits in all in line muzzleloaders.

Thompson Center Muzzleloading Ammo Tubes

3 convenient muzzleloading ammo tubes. Use them as a handy way to carry spare sabots or Pyrodex® pellets. These can also be cut or sized to accommodate your specific charge with sabot, converting each tube to a handy and speedy loading tube...

Thompson Center Ramrod Accessory Kit

A combination of the most popular ramrod accessories in one handy pack. Includes: patch worm bronze bore brush super jag ball & bullet puller cotton bore swab

Thompson Center U-View Powder Flask

At last, a see-through powder flask that makes it easy to monitor your powder supply. This handy device is small enough to easily fit in your pocket or possibles pouch yet it holds enough powder for about a dozen reloads. Spring loaded plunger is easy to...

Thompson Center Universal Lightweight Ramrod

32" universal ramrod that you cut to the desired length. Lightweight, hollow aluminum with do-it-yourself tips that accept standard accessories with 10-32 threads. Length- 32″ (Cut to desired length) 10/32 Threads

Thompson Center Universal T Handle Loading Kit

Made of a lightweight composite short starter and two universal loading tip/jags. Each universal loading tip is contoured to fit spire point, hollow point conical, and round nose projectiles. Screw one on to your Short Starter and one onto your ramrod...